-Link: Building your own AR- more information further down this page!
-Link: LWRC Enhanced Trigger Set [sold out], Timney Triggers [sold out]-
-Link: BCM Gunfighter Charging Handles for 5.56 and 7.62 ARs [in stock]-
Many important items are in stock at non-gouge prices, get them now...
Don't wait until another incident causes panic buying and shortages...
SALE Sat May 18 - Sat May 25 special discounted pricing in blue |

Troy 30rd Battlemag .223/5.56 >> Special <<
$21.95 each 5 for $100 >> 6 for $100 <<
|

GI alum 20rd AR .223/5.56 Magpul Ranger Plates
$16.95 each 5 for $80 5 for $75
|

GI alumuminum 20rd green follower AR .223/5.56
$14.95 each 5 for $70
|

GI aluminum 30rd green follower AR .223/5.56
$15.95 each 5 for $75
|

Magpul 30rd Pmag Gen3 no window .223/5.56
$19.95 each 5 for $95 5 for $90
|

Magpul 30rd Pmag Gen2 w/window .223/5.56
$20.95 each 5 for $100 5 for $95
|

Lancer 20rd steel top translucent .223/5.56
$21.95 each 5 for $105 5 for $100
|

Lancer 30rd steel top opaque black .223/5.56
$19.95 each 5 for $95 5 for $90 Sold Out
|
Arsenal Bulgaria original steel insert 30rd 7.62x39
$48 each 5 for $230
|

Arsenal Bulgaria original steel insert 30rd 7.62x39
$36 each 5 for $170 5 for $160
|

Tapco AK 30rd 7.62x39
$16.95 each 5 for $80 5 for $75 |

Tapco Galil/Golani 30rd .223
$16.95 each 5 for $80 |

S&W M&P40 .40cal 10rd
$39.95 each
|

Auto Ordnance Thompson .45acp 30rd
$74.95 each 4 for $280 4 for $270
|

FN P90 original 30rd 5.7x28
$30 each 3 for $84
|

FN P90 original 50rd 5.7x28
$32 each 3 for $90
|

Umarex Germany original HKMP5 22lr 25rd
$37 each 4 for $135
|

Pro Mag for ATI GSG-5 22lr 22rd
$27 each 5 for $125 5 for $120
|

DSA FN FAL 20rd .308
$23.95 each 5 for $110 10 for $200
|

DSA FN FAL 30rd .308
$25.95 each 5 for $120 10 for $220
|

Steyr AUG original 30rd (also fits STG-556)
$54.95 each 4 for $200 4 for $190
|

Steyr AUG original 42rd (also fits STG-556)
$59.95 each 4 for $220 4 for $210
|

For those who have been hunting high and low
for the original FN FS2000 railed forends...
|

Factory railed forend for FS2000
$189.95 each $179.95 each
|

ATI GSG-AK.22 24rd Germany
$36.95 each 3 left $34.95 each
|

Anschutz MSR RX.22 22rd Germany
$74.95 each 4 left $69.95 each
|

Sig P6/P225 pictured with ProMag 9mm 10rd
(standard 8rd mag shown beside pistol) |

ProMag 9mm 10rd for Sig P6 / P225
$17.95 each 3 for $45 3 for $40 |

KelTec's factory P3AT .380 6-round magazines
$21 each
|

S&W's factory Bodyguard .380 6-round magazines
$22 each
|
ATI GSG-5 .22lr 110rd drums

ATI original German 110rd drum for GSG-5 .22s, $99 each
Black Dog Machine .22lr 50rd drums

Drums for Ruger 10/22s, $75 each Sold Out

Drums for CMMG type bolt/upper-converted .22 ARs, $75 each

Drums for S&W M&P 15-22s, $85 each
Trijicon Compact ACOGs - Trijicon Compact ACOG info -
- more reticle and target images with 3x30 compact ACOGs -

3x24 Compact ACOG TA50-2 Amber fiber optic
originally for mounting on AR15 carry handle (ret $1,148) $960 |

TA50-2 Amber Triangle reticle:
uncluttered, fast sight acquisition |

Trijicon's flattop base for compact ACOGs $75 |

Amer. Defense flattop throwlever ACOG base $80 |

3x30 Compact ACOG TA33-8 Red fiber optic
chevron reticle model (ret $1,257) SALE $1,099
- Sold Out -
|

3x30 Compact ACOG TA33-H Green fiber optic
horseshoe reticle model (ret $1,257) SALE $1,099
- Sold Out - |

TA33-8 model reticle shown in red above
Also available in green and amber, if viewed
against background/target: uncluttered image
|

TA33-H model reticle shown in green above
Also available in red and amber, if viewed
on background/target: fast yet covers detail
|
Trijicon RMR (Rugged Miniature Reflex) optics
 |
 |
Nothing new; refined over the years: light, tough,
auto intensity adjusting for ambient light conditions.
RMRs can be utilized on virtually any firearm.
-various Trijicon RMR setups on Glock handguns- |
Glock 17 with slide mounted 8MOA Trijicon RMR
using basic mount plate locked in rear sight dovetail.
Everyday $: RM02 8moa $565, Glock mount $90
8MOA perfect for defensive handgun applications. |

Dual illuminated RMR shown on S&W M&P9L
|

Everyday $: RM04 7moa $495, M&P mount $90
|

4 MOA dot size on steel plate at 100 yards...
Seems perfect for (target) .22 handguns or rifles,
but slower for eye to pickup quick and take shot
if speed was of essence - especially < 50 yards...
|

7 MOA dot size on steel plate at 100 yards...
Seems insignificant, but the 7~8 MOA dot size
is quicker to get on target and make the shot.
There's always pros and cons for everything...
|

TSD-produced G17 slide with Trijicon RMR
shown above a complete Glock 17L 9mm. |

Switching top ends is easy and provides versatility.
Crisp 3.5# trigger is standard issue in the G17L. |
 |
Cost of package: (other Glock models may cost less)
Glock 17L (G34 Gen4 is another good choice) $695
Trijicon adjRM07 (other models may cost less) $605
TSD RMR-ready stainless slide, threaded ss barrel,
tall co-witness suppressor sights, all internals $760
$2,060
Remember, this combination has two top ends
G17L 9mm top end with 6" barrel is worth $400
G17L has extended slide stop, ext mag release,
factory 3.5# connector that lightens trigger pull
-well written article on Glock17Ls and G24s-
-TSD pistols, Trijicon RMRs and general info- |

Trijicon RMRs and mount combos - some are 'battery operated' and some are fiber-optic 'no-battery'...
They work on auto intensity adjustment via light sensor. RM06, RM07 have adjustable intenstity as well.
Various models available separately (such as RM01 4MOA dot RMR itself, then get the mount desired).
| Trijicon RMR model number and description |
Trijicon retail |
In-stock price |
Adv ord price |
| RM04 Dual Ill no batt 7moa dot or RM05 9moa, unit only no mount |
$550 |
$495 |
$468 |
| RM04-34 Dual Illum no batt req'd 7moa dot w/ tall picatinny rail mt |
$685 |
$615 |
$582 |
| RM01 Battery; 4moa dot or RM02 8moa dot, unit only no mount |
$625 |
$565 |
$530 |
| RM01-34 Battery power 4moa dot w/ tall picatinny rail mount |
$760 |
$685 |
$656 |
| RM06 Batt, 3.5moa dot adj. brightness, RM07 6.5moa adj, unit only |
$675 |
$605 |
$574 |
| RM06-33 Battery, 3.5moa dot adj. brightness w/ low pic. rail mount |
$774 |
$695 |
$657 |
| RM44 Glock, RM45 S&W M&P, rear sight location mounting plate |
$100 |
$90 |
$85 |
| RM55 angle mount rail adaptor (45 degrees out under scope tube) |
$100 |
$90 |
$85 |
| RM33 low picatinny rail mount (lowest height two-crossbolt mount) |
$100 |
$90 |
$85 |
| RM35 mount to attach RMR at top rear of TA01 NSN ACOGs |
$100 |
$90 |
$85 |
| RM34 tall picatinny rail mount (cowitness height for AR-15 flattops) |
$135 |
$120 |
$115 |
| RM34W weaver rail mount (cowitness height for Sig, HK flattops) |
$135 |
$120 |
$115 |
Surefire DG switches and X300 / X400 (w/laser unit) rail mount lights

Surefire X300 light unit on Glock 17 Gen4,
their DG switch just visible under trigger guard. |

For a distinct advantage, the dedicated grip switch
by Surefire is a must - fighting in structures course - |

Special combo deal with X300 + DG switch:
Purchase a Surefire X300 for $275 and get the
DG switch for $50! (DG switch retail $99 value) |

Special combo deal with X400 + DG switch:
Purchase a Surefire X400 for $595 and get the
DG switch for free! (DG switch retail $99 value) |
Surefire: the Industry Leader in Illumination Tools

Left to right: 6P Defender, Nitrolon G2Z, Nitrolon G2, A2 Aviator, E2L Executive, E2D Defender.
Not shown: 6P LED and Nitrolon G2 LED lights (G2 LEDs available in black, olive drab, tan)
Everyday price on most Surefire: 10% off retail - retail price references on: surefire.com.
We have the variety, inventory, and good prices - right here in Hawaii! -link: Surefire Inventory-
There is no substitute for the best - when you want lights with quality and power, get Surefire!
In-store specials will be offered every month. Special prices to be 15%-20% off Surefire's retail.
PMI Drums for Saiga 12ga Shotguns

12 round, retail $103. These have most size-efficient height and radius for capacity. $85 Sold Out

20 round, retail $128. Large diameter but efficient height - holds 20 rounds of 12ga. $110 Sold Out
Magazines for Saiga 12ga Shotguns

5 round original Russian mag shown in Russian SGL12-07 Saiga. $40 Sold Out

10 round SGM (USmfg) mag shown in a US-compliant Saiga 12ga. 12rd version $48 12 available
Do not use these US mags or drums in SGL12-07s and similar Russian pistol-grip shotgun
variants unless you have changed a minimum of five [5] parts to comply with section 922(r).

Here is what the basic Saiga looks like. Average retail pricing was around $550~$600 in January 2011.
Dealer and then retail pricing has risen steadily since then; average retail pricing hovered at $700~$750.

It may not be worthwhile chasing after an overpriced Saiga 12ga only to spend more to 'make it better'.
US legal mfg parts (stock-grip-handguard and internals) are needed and trigger group moved forward.
October 2012: many built-up versions exist, realize that cost varies accordingly how they're configured.
Before or after getting a Saiga-12 and spending ~$400 to turn it into 'tacticool' configuration like below,

* * * * * READ THESE LINKS * * * * *
there will always be proposed measures to restrict firearms to law-abiding citizens; here is another:
link: ATF may push restrictions for semiauto shotguns, be aware of this
Back in 2001: If it resurfaces for Saiga-12s, be warned your 'investment' may not be easily sold afterward.
link: ATF-ruling-2001-1 pertaining to semiauto shotguns fed by drums
* * * * * * * * * *
Build your AR from a lower receiver and a complete flattop upper!
Building with separate components can save you hundreds of dollars!

Speculators, armchair commandos and those who don't know make negative comments about mixing parts.
Winners, fighters and those in the know are smart to build their ARs to desired configuration and save $$$.
Pictured above: CMMG complete 14.7" M4 flattop upper with permanently attached birdcage flashhider,
Daniel Defense EZ CAR railed handguard, DPMS complete lower no buttstock, Magpul rear sight,
buffer spring, buffer, receiver extension "buffer tube", lock ring, end plate, Magpul CTR buttstock.

Simple build: get a flattop upper, build a lower or purchase a complete lower, and then add a rear sight.

- link: examples on building ARs -
- link: points to be aware of when building ARs -
AR-15 receivers, parts and various accessories to build the AR-15

CMMG complete flattop upper 14.5" barrel + permanently attached Phantom flash hider for 16" minimum.

Typical flattop upper 16" barrel + A2 birdcage flash hider. Practically all AR companies market this version.

Various AR-15 stripped lower receivers and lower parts kits: many ways to start your AR project...

^ Typical lower with A2 grip, standard ribbed stock ^ Typical lower with A2 grip, Magpul ACS stock
Various parts and trigger groups for AR-15s

LWRC Nickel Boron trigger set $110 Sold Out 'Lower parts kit minus trigger' $30 Sold Out

McCormick triggers $199 Sold Out Timney triggers $219 Sold Out
Parts kits, and individual parts are available. Trigger groups by McC or Timney occasionally in stock.
Vital spare parts for AR-15s

It can happen: broken extractor retaining pin. Have some spares!
Failures to extract may very well be due to a broken retaining pin. |

Upgrade kit for positive extraction -
Be prepared, just $12.95 each kit |

Get spare extractor, keep two pins with each
DPMS extractor: $16, two extrac.pins: $4.50
alternate extr - High Standard extractor: $23 |

Keep a spare firing pin and two ret.pins with each rifle
DPMS firing pin: $9, two firing pin retaining pins: $4.50
alternate firing pin - High Standard firing pin: $11 |
Useful parts for AR-15s

Delrin non-marring tool for tough push pins: $11 Secured hammer / trigger pin set for ARs: $17
BCM Gunfighter extended latch charging handles

5.56 (.223) small or medium latch $46 7.62 (.308) small or medium latch $56
large latch version also available, $46 large latch version also available, $56
Daniel Defense Omega Rails

^ L-R: standard carbine handguard, Omega, EZ CAR, double heatshield handguard. ^ EZ CAR rail $169
Daniel Defense rails are made in the USA! They are lightweight, quality machined and have no sharp edges!
Omega rail models ($269 and up) have a narrow oval shape. EZ CAR rail ($169) is full round diameter.

Daniel Defense Omega rails: standard type $269 for POF/Adams Arms large gas piston type $299

Shown: top is a POF gas piston upper, below is standard gas tube. POF-compatible Omega Rail installed.

Pics above: left rail has widened channel for POF gas piston cylinders, rail on right: for standard gas tube.

Daniel Defense Omega Rail 12.0 for standard gas tube 20 inch barrel AR-15 systems $319
3 ladder rail covers included. (Ladders also available Olive Drab, Foilage Green, Flat Dark Earth, $12ea)


Pictured above: Original standard handguards on 20 inch barrelled AR-15


Above: handguards changed to Daniel Defense Omega Rail 12.0
Shown with YHM folding front sight, Trijicon ACOG TA11 on Larue mount, MA Tech 600m rear sight.
Troy carbine 7" quad rails in Flat Dark Earth or Black

These have forward and rear, both left and right side integral quick-disconnect sling mount positions.
Quick and easy to install by owner of rifle, the drop-in Battle Rail is available at $159.
Troy folding front and rear sights for AR-15 flattop uppers

Folding sights for AR-15s, two types of front (AR, HK) and the standard two-aperature rear.
Troy front sights are designed for usage on the 'same-height-as-flattop' gas block rail or railed forend.
Pictured left to right: Front: $99 (two types) AR style, HK style Rear: $119 Standard flip aperture
Troy folding front and rear sight set - Micro series

Dioptic set: AR style front, diamond aperature rear Standard set: HK style front, circle aperature rear
These 'micro' sight sets are for rifles with higher rail tops versus standard AR15s. Sold in sets only, $195
Examples: MSAR STG556, Sig 556, HK 416... example of Micro sight set on MSAR STG556
Knights Mfg 300m and 600m folding rear sights for AR-15 flattop uppers

600 meter $165 and 300 meter $135 folding rear sights by Knights Manufacturing. Very low profile.
MA Tech 600m folding rear sights for AR-15 flattop uppers

Low mount elevation adjustable folding rear sight, postitive click in 50 meter increments, $105.
*2011 retail $155; it averaged $130. Then in 2012 dealer and retail price dropped way low. Now: $105.*
*While price drop could be a bonus to consumers, how in the world do they devalue such a proven item?*
Designed in conjunction with Picatinny Arsenal engineering staff and rigorously tested at Fort Benning and Aberdeen Proving Ground for robustness, ease of use, effective targeting out to 600 meters. US Army issue.
Magpul
Due to a near-impossible re-supply of parts via normal and otherwise ideal free-freight
distributor sources, all current / remaining inventory of Magpul parts will be up 10-12%.
This small upcharge will cover amounts that will be unavoidable with actual freight cost.
If you don't want to buy it locally from me, go deal with online sources that are happy to
overcharge you with inflated and often untruthful shipping fees to us in Hawaii. 2/19/13
(All prices in the Magpul section below do not reflect this small 10-12% price increase)
Magpul Back-up Sights
Magpul's folding front and rear sights for AR-15s, priced right and in various colors...
Colors available: Black, Olive Drab, Foilage Green, Flat Dark Earth Front: $40 Rear: $58

'GenII' (slightly lower profile) Magpul folding front and rear sights available: Front: $40 Rear: $58
A closer look at Magpul folding rear sights

Rear sight can be folded at will by pressing it down. Deploying it is via the serrated tab by lock notches.

Small rear aperature leaf can be up or folded forward and down to view sight picture with large aperature.
These folding rear sights are affordable; only $55. They can handle some abuse, but are not indestructible.
Magpul Components for Rifle Slings

MS2/3 slings $50, MSA for MOE handguards $25, RSA for rails $30, ASAP plates $30, QD mounts $15
Magpul MOE handguards

MOE handguards in stock: $30 each. Colors available: Black, Olive Drab, Foilage Green, Flat Dark Earth
Magpul MOE grips

MOE grips in stock: $21 each. Colors available: Black, Olive Drab, Foilage Green, Flat Dark Earth
Magpul Wedge grip adaptor Magpul QD plug-in adaptor

Wedge - allow use of MIAD grips on AR10s, $4. QD Mount adaptor plug-in for ACS stocks, $15.
Magpul ACS stock assembly

Magpul's ACS retracting stock shown in black. Stocking Milspec tube dimension only, $110.
Some ACS stocks in Flat Dark Earth and Foilage Green also available
- explanation of Milspec vs Commercial tube and stock dimensions -
Magpul ACS-L stock assembly

ACS-L is a lighter and no-storage-tubes version of the previous ACS stock. Amazingly they finally have
sense now to include the $15 QD swivel attachment; before it wasn't included with a pricier ACS stock.
ACS-L (and ACS) stocks are 1" longer than MOE/CTR/STR stock assemblies. Milspec ACS-L $100.
Magpul STR stock assembly

STR is a CTR with storage tubes. Sadly, the QD swivel attachment on the STR is one-sided only so it
doesn't have dual-side capability that the winning CTR stock has. Dual QD swivel mount is optional !!
Reversible QD swivel mount $15. Dual QD swivel mount $20. Stocking milspec tube STR only, $100.
Magpul stock assemblies MOE and CTR - Various colors available!

Black, Olive Drab, Foilage Green, Urban Dark Earth (available only thru Larue Tactical), Flat Dark Earth
MOE type, $60 each CTR type (adds dual side QD swivel mount, locking tab), $80 each
LMT 'SOPMOD' buttstocks (special operations peculiar modification)

LMT stock assemblies $210 (milspec dim only). These are shorter than Vltor EMODs. Dark Tan, Black.
Vltor 'EMOD' buttstocks (enhanced modstock)

Vltor EMOD stock assemblies $126 (milspec dim only). Flat dark earth, Black.
Vltor 'IMOD' buttstocks (improved modstock)

Vltor IMOD stock assemblies $100 (milspec dim only). Shorter than EMODs. Flat dark earth, Black.
- explanation of Milspec vs Commercial tube and stock dimensions -
Many desirable parts may be in stock for building your AR-15 project:
| Receiver extensions (buffer tubes) |
Milspec tube $25 - $40 |
Commercial tube $25 - $30 |
| End Plates $5 and Lock Rings $4 |
universal |
universal |
| Buffers $18 and buffer springs $5 |
universal |
universal |
| Standard ribbed M4 stock sets $70 |
some sets milspec dim tubes |
some sets commercial tubes |
| Magpul MOE type stocks $60 |
Black / FolGrn / OD / FDE |
Black / FolGrn / OD / FDE |
| Magpul CTR type stocks $80 |
Black / FolGrn / OD / FDE |
Black / FolGrn / OD / FDE |
| Magpul ACS type stocks $110 |
Black / FolGrn / FDE |
- - - |
| Vltor IMOD stocks $100 |
Black / FolGrn / FDE |
- - - |
| Vltor EMOD stocks $126 |
Black / FDE |
Black / FDE |
| LMT Crane SOPMOD stocks $210 |
Black / Dark Tan |
- - - |
To complete your AR-15 project in color:
| Daniel Defense EZ CAR Rail - solid budget-priced quad rail, $159 |
Black |
| Daniel Defense Omega Rail - machined aluminum quad rail, $269/$299 |
Black |
| Magpul XTM rail panel sets - package of 4 pairs covers one length, $8 |
Black / FolGrn / OD / FDE |
| Falcon Industries ladder rail cover - covers one carbine rail length, $12 |
Black / FolGrn / OD / FDE |
| Magpul MOE pistol grips - storage grip (storage cores optional), $21 |
Black / FolGrn / OD / FDE |
| Magpul MIAD pistol grips - storage grip and various grip pieces, $36 |
Black / FolGrn / OD / FDE |
| Magpul Backup Sights - folding front, $40 folding rear, $57 |
Black / FolGrn / OD / FDE |

Finally! a short ladder rail cover that holds and guides wires as seen above and below, $6 each

Clean routing of wires is a must; best universal switch location for either hand to access is handguards.
- link: more on light mounting locations -
Magpul Olive Drab and various shades on an AR-15 rifle

Four paint colors Earth, Sand, OD, Forest Green on barrel assembly and receivers, olive drab furniture.
Knight's Manufacturing Cerakote Green and Magpul Foliage Green

Entire railed handguard assembly, upper and lower receivers in green Cerakote, foliage green furniture.
Various shades of brown and 'Flat Dark Earth'

Daniel Defense Omega Rail, Sopmod stock Socom Brown. Magpul MOE grip, Lancer mag, Eotech FDE.
Barrel, YHM folding front sight, upper and lower receivers PolyT2 Tan by Robar Coating Technologies.

Surefire Scout light, Tango Down tape switch rail cover and Troy folding rear sight in Flat Dark Earth.
Trijicon ECOS 4x ACOG's dark earth color is yet another shade. -link to Trijicon TA31ECOS page-
|